6 min read
A White Paper: Strategic Alignment of UFAD with the LEED v5
Abstract LEED v5 represents a fundamental shift in the world's leading green building rating system- from prescriptive,...
SoHo-w Hydronic Fan-Powered Linear Terminal is designed to create an efficient and simple solution to meet perimeter heating needs, in a variety of residential and commercial applications. The unit is ETL listed, fully certified to UL standards.
The low profile terminal housing is 20 gauge (1mm) galvanized steel, pre-painted black. It is designed primarily for low-height raised access floor and recessed perimeter trench installation. Multiple mounting options are available; the terminal can be suspended from adjacent finish floor surface via support flanges, or it can be set directly on a floor (or subfloor) on threaded leveling legs, which provide up to 1" (25mm) of manual height adjustment.
The hydronic fin pack has been rated in accordance with AHRI Standard 410; rows are 3/8"Ø (9.5mm) copper tubing with standard 1/2" Male NPT (15mm) supply and return connections. Finned length and heating capacity are dependant on overall terminal length and scheduled performance requirements (specify on order).
Heat is actively circulated using air flow supplied by 24VDC variable speed ECM cross-flow fans; configuration and maximum capacity is dependant on overall length of the terminal / fin pack. Primary power and controls are housed externally in a SoHo Hub control box (available separately); signals are transmitted via plug and play molex connection. The linear grille is available as extruded aluminum or stainless steel, in a variety of sizes and configurations (specify on order).
SoHo-w/c Hydronic Fan-Powered Linear Terminal is designed to create an efficient and simple solution to meet perimeter heating and cooling needs, in a variety of residential and commercial applications.
The low profile terminal housing is 20 gauge (1mm) galvanized steel, pre-painted black. It is designed primarily for low-height raised access floor and recessed perimeter trench installation. Multiple mounting options are available; the terminal can be suspended from adjacent finish floor surface via support flanges, or it can be set directly on a floor (or subfloor) on threaded adjustable leveling legs, which provide up to 1" (25mm) of height adjustment.
The hydronic fin pack has been rated in accordance with AHRI Standard 410; rows are 3/8" (9.5mm) copper tubing with 1/2" NPT (15mm) supply and return connections. Finned length varies based on overall terminal length and scheduled performance requirements (specify on order). Hot or chilled water can be passed through to meet seasonal heating and cooling requirements.
An IEQ double deflection drain pan extends under the entire length of the water coil / connections. The drain pan is galvanized steel, pre-painted black, and includes a 3/4" (19mm) condensate drainage connection. The terminal interior (including the drain pan) is fully lined with insulation to prevent undesirable condensate formation.
Active air flow is provided by 24VDC variable speed ECM cross-flow fans, available in standard and high capacity configurations to meet a range of performance requirements. Primary power and controls are housed externally in a separate SoHo Hub control box; signals are transmitted via plug & play molex connection.
The linear grille is available as extruded aluminum or stainless steel, in a variety of sizes and configurations. Ten (10) standard colors are available; custom colors and finishes can be provided to match architectural design (specify on order).
Features
- 20 gauge (1mm) galvanized steel terminal housing, pre-painted flat black
- Multiple linear grille options available (specify on order)
-
- Extruded aluminum / stainless steel (304 / 316 Series)
- Flanged / flangeless configurations
- Natural aluminum finish options or ten (10) standard powder coat colors; additional colors and finishes available at architect's choice
- Optional threaded leveling legs for unit support
- 0-1" (25mm) maximum manual height adjustment
- ETL listed, fully certified in accordance with UL standard [UL STD. 60335-1 & UL STD.60335-2-40]
- Hydronic fin pack (performance rated in accordance with AHRI Standard 410)
- Variable finned length (based on terminal length and scheduled performance requirements)
- 3/8"Ø (9.5mm) copper rows
- 3" (76mm) fins / eleven (11) fins per 1" (25mm)
- 1/2" Male NPT supply / return connections
- Options for same side or opposite end connections, with side or front piping access (specify on order)
- 24VDC variable speed ECM cross-flow fans
- 1x single fan assembly / 65 cfm (111 m³/hr)
- 1x dual fan assembly / 130 cfm (221 m³/hr)
- 1x triple fan assembly / 185 cfm (315 m³/hr)
- 2x dual fan assemblies / 250 cfm (425 m³/hr)
Specifications
Application:
Low Profile Fan-Powered Heating
Raised Access Floors | Recessed Perimeter Trench
Terminal Construction:
Galvanized Steel | 20 Gauge (1mm) | Pre-Painted Black
Terminal Dimensions:
33" x 7" x 4" (838mm x 178mm x 102mm)
48" x 7" x 4" (1219mm x 178mm x 102mm)
63" x 7" x 4" (1600mm x 178mm x 102mm)
78" x 7" x 4" (1981mm x 178mm x 102mm)
Air Flow Capacity:
One (1) Fan (1x Single Assembly) | 65 cfm (111 m3/hr) | Minimum 33"L (838mm) Unit
Two (2) Fans (1x Dual Assembly) | 130 cfm (221 m3/hr) | Minimum 48"L (1219mm) Unit
Three (3) Fans (1x Triple Assembly) | 185 cfm (315 m3/hr) | Minimum 63"L (1600mm) Unit
Four (4) Fans (2x Dual Assembly) | 250 cfm (425 m3/hr) | Minimum 78"L (1981mm) Unit
Heating Capacity:
3,000 Btu | Minimum 33"L (838mm) Unit
5,900 Btu | Minimum 48"L (1219mm) Unit
8,400 Btu | Minimum 63"L (1575mm) Unit
11,400 Btu | Minimum 78"L (1981mm) Unit
Refer to Performance Summary for Additional Information
Grille Configuration:
Extruded Aluminum | Natural Anodized / Powder Coat Finish / Fully Flanged / Partially Flanged / Fully Flangeless
Stainless Steel | 304 / 316 Series Finish | Fully Framed / Fully Frameless
Specify Grille Configuration Options On Order
.jpg?width=338&height=149&name=SoHo_Logo-2C%20(1).jpg){kind=logo}
Factory Mounted Valve Package
We have introduced a valve package component to our SoHo-w and CLW product lines. This addition, featuring a factory-installed hot water coil valve package, not only streamlines the installation process but also upholds the consistent and reliable quality that you've come to associate with AirFixture. The flexibility in control options and valve package configurations further accelerates construction time.
- Manual Ball Valve with Memory Stop
- Unions
- Y-Strainer
